Aye, Toro Health Sites
Keep yourself and those you know healthy
BodyGem Indirect Calorimetry Device For Measuring RMR
July 13th, 2010 by admin
After the BodyGem has self calibrated, it will beep and the status light on top will turn green, indicating it’s ready to start the RMR test.
Begin the measurement within one minute from the time the indicator light begins flashing green.
NOTE:: If the measurement is not started within a minute, the indicator light will turn amber,indicating stand-by mode.
• In stand-by mode, press the Start Button. The BodyGem device will self-calibrate and the indicator light will flash amber. The indicator light will flash green when it is ready to begin a measurement.
• Position the mouthpiece with nose clip on the client.
• Place the nose clip on the patient’s nose to close the nostrils and make sure the patient maintains a good seal around the mouthpiece.
• Ensure client is seated, comfortable and they have been instructed not to move during the measurement. They will need to hold the BodyGem device during the measurement. To make this as easy as possible, have the patient support their arm on the armrest of the chair, a pillow or with the opposite hand.
When the Single-Use Breathing Attachment is positioned on the patient:
• The indicator light will change to a non-flashing green during the measurement.
• The BodyGem device will buzz softly throughout the 5-10 minute measurement period.
NOTE: Measurement time will vary, as the time needed to reach a steady state of breathing is patient-specific.
At the completion of the measurement, the BodyGem device will beep and the indicator light will change back to amber, signaling the end of the measurement.
BodyGem Indirect Calorimetry Device For Measuring RMR